Base Collar

Base Collar

Technical specification

Ringlock --Base Collar
Size (mm)	Length (mm)	Material	Weight (kg)
ø48.3*3.25	L=200	Q345	2.00

Standard

Standard

Technical specification

Ringlock --Standard(with joint pin)
Size (mm)	Length (mm)	Material	Weight (kg)
ø48.3*3.25	L=1000	Q345	5.60
ø48.3*3.25	L=1500	Q345	8.04
ø48.3*3.25	L=2000	Q345	10.47
ø48.3*3.25	L=2500	Q345	12.91
ø48.3*3.25	L=3000	Q345	15.35

Ringlock

Specification
Dejin’s support and scaffolding products use high-strength steel materials with a special galvanizing method to reinforce its durability. Moreover, with our accumulated technological know-how and wide construction experience, Dejin offers you various top-notch quality.
Dejin support system is not only use on high-rise buildings, but also mega projects such as brideges, dams, highways, tunnels, stadiums, and airport control towers.
Product Introduction
Ringlock support system is a modular scaffold system which is more safe and convenient, it can be divided into 48mm system and 60mm system. Ringlock system is constitute of standard, ledger, diagonal brace, jack base, u head and other components. Standard is welded by rosette with eight hole that four small holes to connect ledger and another four big holes to connect diagonal brace.
The reasonable design make the system forced by three points that can resist bending and anti-skating. Please refer to the force diagram below:

When we hammer down and fix the wedge pin , the joints will be connect with standard closely and make the vibration from ledger pass down to the ground. So it can make the wedge pin get the vibration less and will not be bounced off.

Ringlock

Ringlock

ringlock scaffolding system Advantage
●Advanced technology, reasonable joints design, stable connection.
● Assembling easily and quickly, greatly reduce the time and labor cost.
● Upgrade raw materials by low-alloy steel.
● High zinc coating and long life to use, clean and beautiful.
● Automatic welding, high precision and superior quality.
● Stable structure, high bearing capacity , safe and durable.
Dejin Ringlock products are engineered to meet the highest quality standards based on three simple factors:
● MATERIAL We only use the highest quality steel in our products. Our steel is certified, tested and conforms to or exceeds industry standards no matter the location or climate.
● FIT AT-PAC products are engineered with versatility and usability in mind. Our modified product designs increase efficiencies and productivity, saving your projects time and money.

●FINISH Where applicable, our products are finished and protected by hot dipped zinc galvanizing. This method of finishing maximizes the utilization and extends the product life.